Make Drill Bit Storage Yourself: 7 Options That You Can Try for Yourself!

7 DIY ways of making drill bit storage

Drill bits, can you find one when you seriously need to get your hands on one? Many people find it difficult to maintain track of their drill bits. Before you know it, every time you need to do small drilling, you’re scrambling to find bits. When it comes to organizing your equipment, it doesn’t matter how many you have or how many you don’t. As a bonus, you’ll save money by not having to buy new drill bits when you lose them.

Organizing drill bits is not commonly associated with being attractive, but this Project or activity project fits into that category. This can be a great evening project for those of you who are handy with wood that will help you organize your workspace.

A great number of drill bits can quickly collect in the hands of an enthusiastic do-it-yourselfer. To avoid this, you may have difficulty locating a certain drill bit. Furthermore, due to their tiny stature, they are prone to be disoriented.

But how about if someone informed you that there are many options for storing your pieces to make them conveniently accessible? That’s right; you read that correctly! This implies that your tasks will flow smoothly as well as your workshop will be clean and orderly.

We will discuss a few DIY projects to help you store your drill bits in a more orderly and easy-to-find way.

 

1

If you have a cellar or garage, you may use plumbing fittings to arrange your drill bits and other tools. The following items will be required: a round saw, PVC pipe, and wood screws, among others.

The length of the PVC pipe will be determined by how many drill bits you have stored in your toolbox or toolboxes. When cutting your PVC pipes, cut one end at a 45-degree angle to make the cubby holes. Then, nail them into a panel or pegboard to hold them in place.

Make certain that the compartments are securely fastened to the wall with at least two screws. This will guarantee that the cubbies are sturdy enough to keep all pieces in their proper places. You may now store your drill bits in the cubbies so that you have quick access to them.

 

2

Another useful tool for organizing drill bits in the workshop is a magnetic bar mounted anywhere in the workspace. It is just a matter of screwing together strong magnetic strips and a wooden frame and then mounting it on the wall to complete the project.

Your drill bits will adhere to the magnetic strips, making it simple to find and use the ones you need when necessary. This strategy also makes cleanup a lot less difficult. Furthermore, it may be used to arrange thin saw blades or hex keys, among other things.

 

3

If you can acquire or make a basic flat tray, you may use it to keep your bits and pieces organized and in one place. It will neatly retain your parts at a comfortable viewing height. The tray must be large enough to accommodate all of your drilling equipment.

However, you will need to cut the rear of the tray at a 45-degree angle to complete the project. Using this method, you will be able to screw it into the wall firmly.

Still, if you do not already have a tray, you will need to construct one from scratch out of wood. This will eliminate the need to dig through the tray of random drill bits in the future.

 

4

You may store your drill bits in a slice of foam insulation to keep them organized. A Styrofoam wall storage unit will store the bits and pieces and other small items within easy reach.

To begin constructing the Styrofoam storage, you will glue a 1/2-inch piece of foam to a 1/2-inch piece of plywood. You must, however, utilize a foam that is compatible with the glue in question.

After that, push the foam into the desired location and allow it to cure for a couple of hours before continuing. Make as many holes as you wish for the drill bits by using a screwdriver to punch them out. Last but not least, glue the plywood to a wall above your workbench and fill it with the various components.

 

5

Drill bits are tiny and can easily go misplaced if they are not properly kept. The best part is that a homemade indexing stand may be used to solve this dilemma.

However, you will require a plank of wood, wood glue, and plasterboard screws to complete this project. A piece of wood is glued on the top of another woodblock to create support for the book. Then, to secure the blocks in place, drill plasterboard screws through each one of them.

Then, using the many drill bits that you have, drill each of their holes. You should drill the holes into both the top and bottom blocks of the block assembly. Finally, using a small marker or pencil, write the bit size above the hole in which it will be installed.

 

6

Simply glue the foam on a piece of plywood that is broader than the foam to create this pointy-tool pincushion. Make certain you select an adhesive that is suitable with foam (PL 500 is one). Then push the foam into the desired location and allow it to cure for a few hours. Punch holes for the accessories into the foam with a small-diameter Phillips screwdriver or a handsaw that is rotated at a modest angle. As you insert the tools, they will expand the holes to ensure that they will fit. Attach the plywood to a shop wall above your workbench and begin loading it!

 

7

Another ingenious solution to keep your drill bits organized is to use a rotating spice rack to hold them. A huge collection of bits is best organized using this strategy, which is the most efficient.

All that is required is the transformation of a spice rack into a spinning organizer. Each drill bit should be assigned to a specific slot on the rack.

One of the most advantageous aspects of this approach is that it does not take up a lot of room on your work surface. Furthermore, it is portable, transporting it quickly from one room to another for tasks.

 

Other Simpler Ways

Acquiring a toolbox, for example, maybe all that is required to get organized for the ordinary individual. An inexpensive one may be found at your local hardware store. They are available in various forms and sizes, and you should select one that is equal in size to the number of tools you want to use. It should also include multiple compartments to aid in the organization of all of the contents. It’s also important to consider how much weight you’ll be lugging about in your toolbox while making your selection! Check to see if it has a nice handle. There are also tool bags available that may be used for the same reason if that is more your style. When arranging your toolbox or tool bag, place the tools you use the most frequently in the top compartments and the tools you use the least frequently in the lower sections.

 

Final Words

While buying a drill bit box or toolbox is convenient, it just can’t match with the pleasure of making one for yourself. You can use any of the ways described in the piece here! And you might just have a great weekend!